Block Adhesive
SR Block Fix is a polymer modified adhesive mortar specially designed for thin bed fixing of masonry blocks of various kind including light weight blocks. This product helps in block fixing with thin water tight joints which are strong and give better bonding of the blocks in the masonry. SR Block Fix powder with clean water, in the proportion of four volumes of powder to one volume of water. This gives an even consistency smooth paste. Use of a mechanical or electric paddle mixer yields good results in through mixing. Slightly wet the blocks surface which receives the adhesive and apply the SR Block Fix paste evenly with a suitable trowel and firmly place the building block after slightly wetting the bonding surface and set it in perfect line and level. Clear away the excess mortar from the joints immediately.
Direction for use :
-
- SR Block Fix is a ready to use material which requires just addition water on site to make a ready to use mortar. Because of thin bed block fixing one can get extra strong bonding of the
blocks and helps in achieving good plumb.
- SR Block Fix joints are waterproof hence there is no chance of rising dampness in the masonry.
- No soaking of the block required. No curing required.
Properties : Bulk density : 1650 kg/m² Pot life of paste : 45 min at 35° C Form : Free Flowing Powder Color : Grey
Coverage : SR Block Fix is available in 20 kg sacks. SR Block Fix can fix Blocks on an area of 3-3.5 sq. ft. if fixed with a uniform bed thickness of 2 mm of adhesive.
