HEAT GARD
SR-HEAT GUARD is a heat reducing & ‘Energy Saving’ elastomeric coating composed of acrylic emulsion polymers, microspheres, properly selected & graded inert fillers, light fast & weather durable white pigments, additives & water as medium. It is used as a heat insulating coating on building rooftops & exterior walls because it helps in reducing power consumption substantially by reducing the load on air-conditioners & keeps the interiors cool with additional function of waterproofing.
Method of Application :
Surface Preperation: on Cementitious Surfaces
Surface to be applied upon must be free from dust, loose material, paint, oil, or any other material which may impair adhesion
Mechanical means such as wire brushing & shot blasting can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required
All surface cracks up to 5 mm width should be filled up with sr crack filler.
Priming
All new cement-sand renderings & concrete surfaces should be allowed to age for 6 to 8 weeks before surface Coating Prime with SR-HEAT GUARD (2 part primer : 1 part water)
Apply with brush or roller.
Benefit :
Single component - ready to use.
Easy to apply - by brush, roller or spray.
Heat insulation - Non conductive properties keeps the building warm in winter and cool in summer.
UV resistance - Resistance to UV emission reduces heat conductivity.
Non Toxic - Safe for the environment and eco friendly.
Microbial resistant - Prevent growth of algae, fungus and moss.
Precautions :
SR Heat Guard do not apply on wet and damp surface.
Apply as final coat , no over coating on SR Heat Guard.
Do not dilute more than 20% with water.
