Natural Viscosifier Cum Fluid Loss Control
Natural Viscosifier Cum Fluid Loss Control is a polymer for core drilling, water well drilling, oil and seismic shot hole drilling. Lower solids drilling fluids based on polymer Viscosifiers have been successfully used for many years, and their effectiveness in increasing drilling rates are well documented. SR-MOLDSIN effectively reduces the API filtration rate of many water-based oil and gas drilling fluids and may also be used to increase and stabilize the viscosity to improve hole cleaning and suspension properties in a wide variety of fluid environments. Because it is effective at low concentrations, It’s regular provides a cost-effective mean of improving drilling fluid performance. In many drilling operations XC polymer, are normally used to viscosity drilling fluids applied for drilling section between 500/1000 m – 2500/3000m. However, expensive XC polymers are not required, as long as drilling is not carried out in horizontal holes or in pay zones where thixotropic drilling fluids are preferred.
To prove cost-effectiveness of Viscosifier Cum Fluid, It should be noted that when applying XC polymer, also fluid loss agent is required. In the case of Viscosifier Cum Fluid, this is not needed as the product has built-in fluid loss control properties.
