Crack Fill Chemicals
SR-CRACK FILL 110 is an epoxy-based polymer modified powder material for filling cracks in the plastered surface. It is composed of resigning, properly selected aggregates, polymer & additives which require the on-site addition of water only. It is ideal to fill 3 to 5 mm wider static cracks, for levelling up walls before tiling. SR Crack fill is non-shrink in nature, good water resistance properties & weathering durability. Cracks filled with SR Crack fill enhances the subsequent paintings quality and life.
Areas of Application:
- To fill the static cracks of 3 to 5 mm sizes in horizontal or vertical areas of buildings & structures.
- To level the undulation of the unplastered or plastered ceilings and walls before painting.
Features benefits:
- Non-sagging, can be used in horizontal, vertical and overhead applications.
- Good adhesion and effective bonding with the plastered substrate.
- High tensile strength, non- shrink and waterproof.
- Cost saver
- As surface leveler before painting it reduces paint consumption and increases the life of the paint making it economical.
Method of Application:
Surface Preparation:
- Remove old caulk from joints. The edges of the joints should be neat and sound.
- Make sure that surface is clean & free from puddle of water.
- The surface should be free of loose debris.
- Contaminations of oil, grease or bitumen should be completely cleaned.
- Damp wood should be allowed to dry out and decayed wood should be removed.
- Roughen smooth surfaces to give a good key.
