• +91-9909928496
  • +91-7874335058
  • info@srdrillchem.com

Construction Chemical

EPOXY FLOORING

SR-EPOXY FL 119 is solvent free composed of liquid epoxy resin, hardener, chemical resistant pigments & properly selected & graded fine fillers and many additives. It is used as floor coating on general building floors, chemical plants, food industries, refineries, water tanks, etc. because it forms hard and tough coating with superior adhesion, excellent mechanical and chemical properties. Areas of Application
  • Walls & floors of General Buildings
  • Apartments, halls, department stores, gymnasiums, schools, basement, etc.
  • Drink bottling plants.
  • Electroplating plants & machinery mountings.
  • Swimming pools & water tanks.
  • Sewerage treatment plants, water treatment plants
Features & Benefits
  • Superior wear resistance property provides durable floors prevents dust generation.
  • Uniformity - Provides joints free monolithic & seamless floor finish provides easy of movements over the floor.
  • A lustrous smooth finish with attractive colour shades raises the appearance value of the floor. C- - Excellent resistance to a variety of chemicals prevents erosion of cementitious substrates.
  • High compressive & tensile strength with little flexibility prevents cracking of the coating.
Preparation New Concrete floor surface should be power floated and levelled. The concrete top surface while laying should not be floated with sprinkling of cement. Concrete should be allowed to cure for a minimum period of 28 days. The ground floor slab and areas, which are subjected to high water table level & rising moisture must be waterproof before floor treatment. Acid clean/ etch of new or old concrete surface is essential to provide excellent bonding of the coating. Wash the surface with water till neutralization. Remove laitance, paints and earlier coating by mechanical abrading. Degrease oil & grease by using solvents like acetone. Apply one coat of primer with a brush or roller over the prepared surface. Apply within 24 hours of drying. } For detailed application methodology of priming, refer datasheet of SR-EPOXY FL 119.

Product Details: